Trennmaschine für leere Kapseln CNJ-01

Structure 

Safety precautions (please be sure to follow)

1. Please check the voltage indicated by the machine.

2. Disinfect the machine with medical alcohol before the machine is operated. After using the machine, be sure to turn off the power switch and unplug the power cord.

3. Please use a single-phase grounded socket and ensure reliable grounding.

4. The mold plate cannot swap position.

5. Do not touch the mold plate by hand when the machine is running! Do not open the rear door of the machine to contact the running gear!

6. A gear rotates clockwise, B gear rotates counterclockwise, and cannot be reversed.

7. If the machine is found to be working abnormally, please stop using the machine immediately, ask the professional maintenance personnel to check the repair, or contact the supplier.

Common problem

If the separation capsule does not work well, please check:

Check if the swing arm activity on the die plate is flexible

Solution: Adjust the position of the swing arm and module

Capsule positioning steel needle position is wrong

Solution: Adjust the position of the swing arm and module

Displacement of two mold plates

Solution: Pay attention to the installation of the mold plate. The module swing arm on the AB mold plate should be on the same horizontal line as much as possible.

Mold plate channel blockage

Solution: Rotate the die in the direction of rotation, check each die channel, and clear the blocked capsule

Module model is wrong

Solution: Replace the required module

Machine speed is too fast

Solution: choose the appropriate speed

Capsule deformation

Solution: Replace the capsule

Electrical schematic